Electric greenhouse heater "Phoenix" with 3 heating levels - 2800 watts

Keep your greenhouse frost-free: With the powerful "Phoenix" greenhouse heater, you can ensure the optimum temperature in your greenhouse. Choose from 3 heating levels (1000 watts, 1800 watts and 2800 watts) and the fan function (circulating air). The integrated thermostat controls the heating automatically to maintain the set temperature. This means you no longer have to worry about the temperature in the greenhouse.

Reliable and safe in operation: Maintenance-free ball bearings, metal blades, increased corrosion protection and a protective conductor make this fan a long-lasting, continuous runner. An integrated temperature monitor switches the device off in the event of a fault, e.g. if the outlet opening is covered by dirt or fallen objects. This prevents damage to the appliance due to overheating.

Energy-saving thanks to low switching differential: The minimal switching differential prevents unnecessary heating. The switching differential is the temperature difference between the switch-on and switch-off point of the heating. If the thermostat has a switching differential of 6°C, for example, then the greenhouse must be heated up to 8°C in order not to fall below the frost heating limit of up to +2°C before the heating is automatically switched on again. Thanks to its high-quality and precise thermostat, the "Phoenix" only heats as much as necessary. This protects the environment and your wallet.

- 3 levels for setting the heat output: 1000 watts, 1800 watts and 2800 watts
- Temperature output: 0 to 26°C
- Air circulation mode for ventilation
- Integrated thermostat with frost monitor function
- 460 m³/h air circulation
- Ideal for greenhouses up to 20 m² with an average height of 2 m
- With chain device for hanging and floor supports for setting up
- Safe operation thanks to overheating protection and protective earth conductor
- Very quiet and evenly operating fan
- Low energy consumption
- Splash-proof according to IPX4